HOMEABOUT USPRODUCTSSERVICESOnline SalesCONTACT US  
Enigin
PCB Repair
PCBs
Contact Fingers
Socket Adaptors
Manual Test Jigs
Others
PCB Repair

We offer rework-repair and modification services. As our commitment to the electronic industry, we have set-up an ultra modern and fully equipped facilities to cater to our clients ever demanding needs in Printed Circuit Board repairs and rework. All our procedures for modifying, reworking and repairing printed boards and printed board assemblies complies with standards set by the Institute for Interconnecting and Packaging Electronic Circuits (IPC), in Northbrook IL.
 


Micro BGA Pad Repair

This procedure is used to replace damaged and missing Ball Grid Array (BGA) pads. The damaged BGA pads are replaced with new dry film, adhesive backed BGA pads. The new BGA pads are bonded to the circuit board surface using a Bonding Iron or Circuit Bonding System.
 

Before
After

 

Close-up Via


Before
After

 

Track Repair

This procedure is used on circuit boards to replace damaged or missing conductors on the circuit board surface.

Before
After

 

Component Relocation


Before
After

 

Socket Change


Before
After

 

Adding Jumper Wires


Before
After

 

Footprint Repair


Before
After

 

Damaged Corners

This procedure is used to repair major damage to the edges of circuit base board material. This procedure is used when extended areas of base material must be completely replaced.

Before
After

 

Feedthrough Board

Most types of damage to base board material can be repaired with this versatile repair kit. There are sections of FR4 to replace damaged board corners, edges and holes. The edge sections have a specially machined tongue along one edge to fit within a groove cut into the board edge.

 

Before
After

 

Gold Finger Repair

This procedure is used to replace damaged and missing gold edge contacts. The damaged gold contacts are replaced with new dry film, adhesive backed contacts. The new edge contacts are bonded to the circuit board surface using a Bonding Iron or Circuit Bonding System.

 

Before
After

 

Internal Shorts


Before
After

 

Services

This procedure is used to replace damaged and missing surface mount pads. The damaged surface mount pads are replaced with new dry film, adhesive backed surface mount pads. The new surface mount pads are bonded to the circuit board surface using a Bonding Iron or Circuit Bonding System.
 

Before
After
 

 

BACK TO PRODUCTS   /  BACK TO SERVICES

TOP

INOVUS TECHNOLOGY SDN. BHD.
(327734-U)
65, Jalan Bukit Senjuang
75050 Melaka, Malaysia
Tel : +606 282 6126
Fax : +606 282 7408



l    HOME    l    ABOUT US    l    PRODUCTS    l    SERVICES    l    CONTACT US    l

All Rights Reserved 2007 Inovus Technology